China high quality High Efficiency Ring Die Sawdust Wood Pellet Plant Complete Wood Pellet Production Line Price for Sale pto shaft cover safety chain

Product Description

High Efficiency Ring Die Sawdust Wood Pellet Plant Complete Wood Pellet Production Line Price for sale

Introduction of the sawdust pellet machine
1. LH biomass wood pellet machine can press biomass particles such as sawdust, straw, rice husk and etc.
2. Use Cold-pressing molding technology, Polishing integer process. Streamline appearance, Compact structure.
3. high output, low consumption and noise, better stability and lower fault rates, Fatigue resistance is strong, continuous production, economy and durability.
4. The machine adopts special high quality materials and Advanced even shaft transmission, Key components are high quality alloy steel adds wear resisting material, Using German vacuum CZPT heat treatment, Service life can be extended 5-7 times.
 

Working methods:
The raw material is under dried condition, which is compressed, and formed into small eraser-sized bits, the final pellets is clean, pleasant and smooth, and its density is more than1.0 G/M3.

Raw material:
This wood CZPT fuel pellet mill machine is researched and developed for producing biomass pellet specially.
The raw material could be sawdust, wood, straw, rice husk, bagasse, cotton stalk, peanut shell, bamboo, empty fruit branch, pulverized coal, waste paper, cottonseed skins, weeds, CZPT stalks and other plant wastes, especially low-bonding and unformed materials.
 
Requirements of the raw materials of wood pellet machine:
Size: 3-5mm
Moisture: 10-15%

LH ring die wood pellet machine:

 

Model Main Power
(KW)
Capacity
(t/h)
Feeding 
Power
(KW)
Conditioner Power
(KW)
Die Diameter
(mm)
Pellet size
(mm)
LH- 320 37 0.2-0.3 1.5 2.2 320 6,8,10,12
LH- 350 55 0.5-0.7 1.5 3 350
LH- 420 90 0.8-1.2 2.2 5.5 420
LH- 480 90 1.3-1.8 480
LH- 508 132 1.7-2.2 508
LH- 558 160 2-2.5 572
LH- 678 185 2.5-3.5 3 11 678
LH- 768 250 4-5.5 4 18.5 768

Advantages:                                                                               
 
1.   Siemens motor, Imported SKF/NSK bearing;
2.   Equiped with Automatic oil and cooling adding system;
3.   National patent;
4.   Competitive price
 
Photos of the LH System capacity wood pellet mill:

Final pellet size:6mm, 8mm,10mm,12mm.

Length : 20-50mm, it can be changed and controlled by yourself;
The finished products are smooth in surface and shapely in posture.
Its hardness is reach to European standard.
Pellet fuel is convenient in the process of manufacturing, packing, storing and transporting as a clean renewable energy.
This kind of granulation is easy to operate and maintain with lower price.
 
We can supply the complete pellet making line, following is our succesful pellet line cases:

 The delivery of the pellet making line machines:
 
Company:

CE certificated:

FAQ
If you are interested in our wood pellet making line, please kindly inform:
 
1.What is your raw material for making wood pellet?
2.What is the size of your raw material?especially the max feeding diameter (mm)
3. What is the moisture content of your raw material?(mm)
3. What is the capcity do you need(kg/h) ? 
4. What is the final pellet size do you need (mm) ?   

Then we will choose most suitable wood pellet machine or make detailed pellet making line for you and quote you ASAP. 
Any more question about the wood pellet machine, please feel free to contact us at any time:

 
 

Type: Horizontal Ring Die
Voltage: 380V
Automatic Grade: Automatic
Controlling Mode: Electric Motor, etc.
Energy Saving: Energy Saving
Certification: CE
Customization:
Available

|

Customized Request

Shaft Collar

Safety Precautions For a PTO Shaft

When you are working around PTOs, be sure to observe several safety precautions. These include removing the shield, keeping a safe distance from the machine, and avoiding entanglement. Entanglement is a serious injury that can even lead to death. Workers who are near the machine should always maintain a safe distance, especially if the speed of the machine is fast enough to entangle clothing. The speed of the PTO is usually 540 to 1,000 revolutions per minute, and the speed is enough to cause injury in a split second.

Safety precautions

One of the most important safety precautions for a PTO shaft is to make sure that it is properly guarded at all times. An unguarded PTO shaft can entanglement a worker, cause an injury, or even cause death. Operator awareness is key in preventing this hazard. Among other things, workers should not make repairs while the PTO is in use or wear loose or frayed clothing when working near the PTO. Likewise, they should read and follow instructions provided with their tractor and implement. Finally, they should use PTO shafts only for their intended purpose.
Another important safety precaution is to wear a protective gear such as a helmet and gloves before operating a PTO shaft. This type of equipment can be extremely dangerous because of its speed. A PTO shaft that is rotating at 540 rpm can travel two metres in less than a second. Damaged shielding is a common cause of entanglement, so it is important to check your machinery for damage before operating it.
When operating a tractor, PTOs should be kept clear of loose clothing. Loose clothing can easily catch on a rotating PTO shaft. Long hair or jewelry can also become entangled in a PTO shaft. It is also important to remember to secure the PTO shaft guard when the tractor is not in use. Also, never engage a PTO when the engine is off.

Types of pto shafts

PTO shafts are used in tractors and other equipment to secure the secondary gear in the tractor. They are available in different styles and sizes. These shafts are designed to withstand pressure, impacts, and tension. They may also include a shear pin and slip clutch. Before buying a new PTO shaft, make sure to check its measurements.
There are two types of PTO shafts available in an Agric rototiller. The first one has a slip clutch and the other has a shear pin safety device. In order to identify the type of PTO shaft used in a particular tractor, it is important to understand what it is used for.
There are two types of PTO shafts: the external and internal. The latter is used for larger machines, such as a lawnmower. The former is suitable for agricultural applications and is the preferred type for large tractors. The former is suitable for plowing, mowing, and shredding.
Transmission PTO shafts are the oldest type of PTO. They are connected to the tractor’s transmission. When a tractor is in gear, it stops the PTO shaft. However, when it’s not, it’s ineffective and can pose serious problems, such as when mowing. This type of PTO can also cause an overrun clutch to prevent the PTO shaft from working properly.
Shaft Collar

Reaction time

It’s important to know your reaction time when working around a power take-off (PTO) shaft. This part of the machine rotates at approximately 540 revolutions per minute and can pull in seven feet per second. Reaction time can be affected by age, physical condition, medications, lack of sleep, and stress. If you’re working around a PTO, be sure to remove any loose jewelry or other items that might interfere with your reaction time.
PTO accidents can be caused by several factors. The operator, the machine, and the environment all play a role. The operator’s physical and mental condition can also contribute to unsafe actions. For example, young operators may lack the knowledge and experience to recognize hazards. Older workers may also have slower reaction times, which can make it difficult to react quickly to slippery work areas.
Reaction time is measured as the time between a stimulus and the response. It does not include the time required to move the hand. Reaction time is a critical factor in sports, where athletes need to be quick to respond to the moves of their opponents. A good reaction time is necessary to score points.
A demonstration of the speed of a PTO shaft is a great tool to demonstrate how dangerous this part of a machine can be. To demonstrate the speed, use a 7-foot sash cord tied to a sliding collar universal joint. Select a 540-rpm PTO shaft, and a three-inch diameter shield. In one second, the rotating shaft makes nine revolutions and travels 7.1 feet. However, a cordless drill does not rotate at full speed and will take at least two seconds to wrap around the string.

Standardization

The standardization of PTO shafts in tractors is a major project. The EU Machinery Directive requires the protection of operators from rotating parts, such as the PTO. This is especially important when parts are accessible, as clothing can easily be wrapped around them, resulting in an accident. To prevent such accidents, manufacturers have begun to install non-rotating guards over the PTO drive shaft. These guards comply with the current EU good practice.
The European Standard EN 12965:2003+A2:2009 specifies the safety requirements for PTO drive shafts and their guards. It also specifies safe working practices for these components. The standard was approved by CEN on 16 September 2019. It is important to follow these regulations to ensure safe operation.
In the 1980s, a movement began among agricultural engineers to standardize the PTO shaft. The movement began because the different types of PTO shafts had not been interchangeable. A common example is the Deutz-Fendt shaft, which had become a standard for tractors.
As the power for PTO drives comes from the gearbox, the counter shaft acts as the PTO outlet. Standardization of PTO speeds makes it easier for manufacturers to design equipment to meet a specified speed. For example, a thresher is expected to run at a specific peripheral velocity of the threshing cylinder, which is a function of standard PTO speeds. This also allows designers to plan pulley arrangements with the standard PTO speed in mind.
Shaft Collar

Safety chains

The PTO shaft is an integral part of a tractor or implement, so it’s essential to secure it with safety chains. These chains are welded to both ends of the shaft and serve as backup connections between the tractor and trailer coupling point. There are several types of chains available, from domestic to metric, to meet your specific needs.
Because of the high speeds of PTO shafts, it’s crucial to protect these parts from being tangled. A single fall of a PTO shaft can cause serious injury or even death. In such an unfortunate situation, safety chains can prevent such injuries. PTO shafts are also extremely dangerous because the components can become hot while they are operating.
In addition to safety chains, operators must also be aware of the hazards that can occur when working near a PTO shaft. Unsafe behaviors, such as performing repairs while operating a machine, or wearing frayed clothing can lead to serious injury or death. In addition, all users should follow the instructions on the tractor or implement they’re using. It’s also essential to use a PTO shaft for its intended purpose.
In addition to safety chains, farmers should also ensure that the PTO drive shaft is securely attached to the tractor or implement. A broken or damaged PTO guard can be just as dangerous as an unprotected shaft. In addition, a poorly fitting PTO guard may provide a false sense of security. For this reason, it’s important to use protective clothing when operating a tractor or implement powered by a PTO.

Shield

The CZPT-Co universal fit PTO shaft shield is a simple and easy to use shield that has a patented lever release. The shield comes in two sizes, the smaller diameter shield is for shafts with a diameter of 1 5/16″ to 2 1/8″ and the larger diameter shield fits shafts of 2″ to 3 1/8″. Each shield is pre-installed with an assortment of bearings. The shield’s length is measured from the end of the yoke bearing groove to the other end.
If you’ve ever tried to work on a PTO shaft, you know that it can be frustrating. A PTO shaft shield is a safety device that covers the shaft and prevents it from rotating. These shields are also designed to be easy to connect and remove. The CZPT safety clip makes it easy to connect or disconnect the shield, and locks into place to prevent it from rotating with the inner driveshaft. The CZPT material used in RPM Transmissions driveline safety shields is strong and rigid.
Another improvement of this PTO shaft shield is the bracket that supports the two-piece PTO shaft and outer shield. The bracket is shown in FIG. 2 as an angled front view. FIG. 7 is a side elevation view of the bracket mounted to the machine tongue.
China high quality High Efficiency Ring Die Sawdust Wood Pellet Plant Complete Wood Pellet Production Line Price for Sale   pto shaft cover safety chainChina high quality High Efficiency Ring Die Sawdust Wood Pellet Plant Complete Wood Pellet Production Line Price for Sale   pto shaft cover safety chain
editor by CX 2023-04-27

PTO Drive Shaft

As one of the leading PTO drive shaft manufacturers, suppliers, and exporters of mechanical products, We offer PTO drive shafts and many other products.

Please contact us for details.

Manufacturer supplier exporter of PTO drive shaft.

Recent Posts