China Hot selling CZPT Flexible Shaft Hose Factory Manufacturer Best Price drive shaft bushing

Product Description

Professionally !!! Concrete vibrator hose ZX-38 (Dynapac type)

Product Uses

   Concrete vibrator hose  drive by Electric motor,gasoline engine and Diesel engine. It is suitable for common concrete compaction, widely uesd in many places such as the bridge, the CZPT construction, the large-scale dam, the high-level building base irrigation pile acted as a column, the crowded mat reinforcement coagulation dirt wall, the major and medium small architectural engineering.

 

Characteristics:

Design in conformity with international and Simple standards

Excellent results on light duty jobs

Economical solution when it comes to internal vibration

Good mechanical performance

Low noise

Product Description

  The  Concrete vibrator hose   is also known as vibrating poker. It is available in various diameters,including 25mm,28mm,32mm,35mm,38mm,45mm,50mm,60mm,70mm and 75mm . It also can be attached to flexible tubes of various lengths ,varying form 1mtr to 12mtr . To be compatible with specific job requirements,the vibrator needle may take different type. Usually driven by the electric vibrator ,the poker also can be used in combination with gasoline vibrator or diesel vibrator .

Model   Interational type Domestic type Russia type
ZX-32 ZX-38 ZX-45 ZX-60 ZX-35 ZX-50 ZX-70 ZX-51 ZX-75
Diameter φ (mm) 32 38 45 60 35 50 70 51 75
Length L (mm) 583 580 583 577 400 479 555 440 450
Vibrating Frequency (HZ) 220 200 200 200 200 200 200 200 200
Vibrating Ampitude (mm) 0.82 1.1 1.2 1.25 0.91 1.15 1.35 1.2 1.4
BEARING 3 pcs 2200 /1pc 6000/2pcs 2202/1pc 6000/2pcs 1204/1pc 6000/2pcs          
Diameter of flexiable hose D(mm) 30 30 32 36 30 36 36 36 36
Diameter of flexiable shaft D(mm) 10 10 12 13 10 13 13 14 14
Weiht with 6mtr hose (kg) 14.5 15 17 23 14 20.5 24 21.5 25
packing size cm 85*65*5.5 mm

 

Material: Carbon Steel
Load: Drive Shaft
Stiffness & Flexibility: Flexible Shaft
Journal Diameter Dimensional Accuracy: IT6-IT9
Axis Shape: Straight Shaft
Shaft Shape: Real Axis
Samples:
US$ 28/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

air-compressor

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are three main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join two heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new one or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China Hot selling CZPT Flexible Shaft Hose Factory Manufacturer Best Price   drive shaft bushing	China Hot selling CZPT Flexible Shaft Hose Factory Manufacturer Best Price   drive shaft bushing
editor by CX 2023-09-01

PTO Drive Shaft

As one of the leading PTO drive shaft manufacturers, suppliers, and exporters of mechanical products, We offer PTO drive shafts and many other products.

Please contact us for details.

Manufacturer supplier exporter of PTO drive shaft.

Recent Posts